You can check the communication status of an Enforcer appliance from the Enforcer console.
To check the communication status of an Enforcer appliance on the Enforcer console
Log on to the Enforcer console if you are not already logged on.
Type the following command: show status
You can view information about the current connection status.
The following example indicates that the Enforcer appliance is online and connected to a Symantec Endpoint Protection Manager with an IP address of 192.168.0.1 and communication port 8014:
Enforcer#: show status Enforcer Status: ONLINE(ACTIVE) Policy Manager Connected: YES Policy Manager: 192.168.0.1 HTTP 8014 Packets Received: 3659 Packets Transmitted: 3615 Packet Receive Failed: 0 Packet Transfer Failed: 0 Enforcer Health: EXCELLENT Enforcer Uptime: 10 days 01:10:55 Policy ID: 24/03/2010 21:31:55
Rate this Article