To determine if a system is configured as 4k Native of 512 emulation drive run the following command from a command prompt
fsutil fsinfo ntfsinfo D: (the drive letter of the 4k drive)
A 4K Native Disk has the "Bytes Per Sector" and "Bytes Per Physical Sector" fields both set to 4096 and isn't supported for cloning. A 4K Sector Disk with 512-byte Emulation will report "Bytes Per Sector" set to 512 and the "Bytes Per Physical Sector" field set to 4096 and is supported for cloning.
Some manufactures have utilities that can be used to change the format from Native 4k to 512 byte emulation to allow these drive to be used by Ghost. Contact your hardware manufacturer for more information on how to change a drive's formatting.
As of Ghost Soulution Suite and Ghost standard tools 3.1 MP3 an image can now be saved to an external drive that is set up as 4k native mode. This will allow the use of external advance format 4k native drives to be used as a destination for saving ghost images on. Ghost images can then aslo be restored from the same advanced format 4k native drive. Ghost can still not restore images to a 4k native drive, only that it can use a 4k native drive as a destination to save the .gho and .ghs files on. Additionally a 4k native drive holding .gho and .ghs files can be used as the souce for performing Disk from image restore jobs.
Imported Document Id
This is machine translated content
Login to Subscribe
Please login to set up your subscription.
Didn't find the article you were looking for? Try these resources.