GRT Backup of Hyper-V Virtual Machines is failing with error: 0xa0009643 - One or more virtual machines have been excluded from the backup
Virtual Machine has to be put in a saved state to perform backup.
Hyper-V Live Backup Requirements
To achieve zero downtime live backups of virtual machines, you need the following conditions met:
1. The VM guest needs to have Integration Services installed, enabled, and running (COM+ System Application Service, Distributed Transaction Coordinator Service, and Volume Shadow Copy Service). Also review the VM settings in Hyper-V, the 'backup' option needs to be checked.
2. All disks involved need to be formatted with NTFS, including the disks within the VM.
3. The Volume Shadow Copy Service and related VSS services need to be enabled and running.
4. The shadow copy storage space for each drive must be available to Hyper-V VSS Writer and be located at the same volume. For instance, the storage space for drive C: needs to be on drive C: itself, and so on. Use the VSSADMIN command from the command line to check the settings. (Use: vssadmin list shadowstorage / vssadmin resize shadowstorage)
5. Ensure the VMs are partitioned using 'basic disk' formatting. At the moment Hyper-V does not support live backup for VMs formatted using dynamic disk partitioning or GPT.
7. Ensure you have at least about 20% free space on each drive involved, such as the drive on the host and the VM's main system drive.
8. Ensure plenty of un-fragmented RAM is available on the host. If a machine is pulled into Saved State, Hyper-V may not be able to bring the VM back online if it can't allocate a continuous block of RAM. Note that there may be sufficient total RAM available but not enough to place a single block. You should therefore aim to keep at least 512 MB to 1 GB of RAM free when all VMs are powered up.
Adding the below registry key and value inside the Windows 2012 guest should resolve the behavior.
You need to add a key called SystemRestore, then a value under it called ScopeSnapshots as follows:
Run a Remote Agent backup (as if you would backup a physical machine) or Upgrade Hyper-V to 2012.
Windows Hyper-V 2008 R2 Cluster and Backup Exec Remote Agent installed on a Virtual Machine running Windows 2012
Imported Document Id