Symantec O3 SAML connector not passing attributes to application from Active Directory.
While checking the AD connection from the IC (Intelligence Canter) you receive the error (fig1).
Please check the following;
1) Make sure end user has needed attributes in the AD (active directory).
2) Test the RO (read only) user has the correct password in the user store configuration (fig2).
3) Test if the user (RO) used to read from the AD has the correct rights. A third party LDAP query tool may be needed; this will mimic the GW’s connection to the AD.
4) Make sure your port in the user store is the same as on the AD (fig3).
The port, password, or the RO user names are the leading cause for this error. If the port is set to 3269 and the error occurs change to 636 and vice versa.
Re-enter the user name and password do not copy and paste doing a copy and paste can add blank spaces to the user name and password.
Login to Subscribe
Please login to set up your
For security reasons, your link to this document has expired. Please click on the attachment link to access this file.
The attachment that you are looking for no longer exists.
There has been an issue retrieving your attachment. Please try again.
Get support for your product, with downloads, knowledge base articles, documentation, and more.
Maximize your product competency and validate technical knowledge to gain the most benefit from your IT investments.
Submit a suspected infected file to Symantec.
Report a suspected erroneous detection (false positive).
Set default language
Do you wish to save this as your future site?