Updated device driver set for VERITAS Backup Exec (tm) 9.0 for NetWare Servers
Driver Set 06/17/2003
VERITAS Backup Exec for NetWare Servers
Driver Set 06
TABLE OF CONTENTS
1. Installation Notes
2. Version compatibility
3. Added device driver support
1. INSTALLATION NOTES
After downloading the self extracting executable file, extract the file to a temporary directory. Copy the files from the temporary directory to the SYS:\BKUPEXEC\NLMS directory on your backup server.
2. VERSION COMPATABILITY
The driver sets for Backup Exec for NetWare Servers (BENW) 9.1 and 9.2 are backwards compatible with BENW 9.0. The driver sets released with those products can be considered to be the latest driver set for use with BENW 9.0. However, those driver sets have not been specifically tested with BENW 9.0. This driver set remains posted as the last driver set that was specifically built for BENW 9.0.
This driver set has not been tested with earlier versions of Backup Exec for NetWare. If you are using Backup Exec for NetWare 9.0.4174 or earlier, you must download and upgrade to the latest version of Backup Exec for NetWare 9.0 before applying this driver set.
3. NEW DEVICE SUPPORT
ADIC FastStor 2 Tape Library with LTO2 drives
ADIC FastStor 2 Tape Library with SDLT 320 drives
IBM 370726 Tape Library with LTO drives
HP SSL1016 UHDL Library with DLT1 drives
HP SSL1016 UHDL Library with SDLT320 drives
HP SSL1016 UHDL with LTO GEN II drives
HP ESL9000 Series with LTO GEN II drives
QualStar TLS-8000, TLS-8211, RLS-4000, RLS-4445, and RLS-4470 Tape Libraries
QualStar RLS-8000 series libraries with LTO drives
Quantum VS160 DLT
Seagate (now Certance) 9SP40 DDS4 Autoloader
Seagate (now Certance) AL810 LTO Autoloader
Sony D81 Tape Library with SDX-500c drives
Note that device driver certification is an ongoing process. Please refer to the compatibility page for Backup Exec for NetWare Servers for the most recent updates to the drive support list.
Rate this Article