When using VERITAS Volume Manager (tm) for Windows and dynamic disk groups, attempts to reactivate a missing disk will fail under certain conditions.
Attribute or key is not found for the object.
This TechNote focuses on the
Reactivate function within Volume Manager. See the Related Documents section of this TechNote for information on how to use the
A dynamic disk group is created using three disks.
Disk View is selected within Volume Manager (Figure 1).
Figure 1 - Disk View Normal
At this point, one of the three dynamic disks is physically removed and a rescan is performed. When the rescan has completed,
Disk View will show an entry for a missing disk (Figure 2).
Figure 2 - Disk View Failed
An attempt is made to reactivate the missing disk using these steps:
1. Right-click on the missing disk
3. In the Reactivate Disks box, select
A Volume Manager Alert Message will be displayed detailing the source of the error (VxSvc_vmnt), date, time, and a description, i.e. Failed to reactivate disk Missing Disk. An error message will also display stating that an attribute or key is not found for the object (Figure 3).
Figure 3 - Error Message
The reactivate disk command executes a manual restart on a disk. This assumes the disk is present. In this scenario, the disk has been physically removed and logically can not be reactivated. To successfully reactivate this dynamic disk, return the drive to its location and click "
Imported Document Id
This is machine translated content
Login to Subscribe
Please login to set up your subscription.
Didn't find the article you were looking for? Try these resources.