Configuring basic CCS Manager settings
You can change the basic CCS Manager settings to assign roles and configure the data collectors.
When you configure the CCS Manager settings, the panels that appear vary depending on the components that are deployed on the host system. In addition, the CCS Manager settings determine what information appears. For example, options to enable data sources only appear if the CCS Manager is assigned to the CCS Manager Collector role.
If you modify more than one CCS Manager at a time, only the common setting tabs and fields appear. Select each CCS Manager individually to view all settings that apply to the CCS Manager.
Note: |
If you make a change to the basic CCS Manager settings, the changes do not appear immediately. You must close and reopen the Edit Settings dialog box before the new options appear. |
Perform the following procedure before configuring the basic CCS Manager settings:
Install the CCS Manager. You can install the CCS Manager along with the CCS Application Server on a single computer, See Installing the CCS Suite.
You can install a standalone CCS Manager. See Installing a standalone CCS Manager for a scale out deployment of CCS.
To configure the basic CCS Manager settings
Double-click the shortcut icon of the CCS Console on the computer desktop.
In the launched Select Symantec Control Compliance Suite Server dialog box, enter the following:
Application Server
Enter the name of the computer on which the CCS Application Server is installed.
TCP\IP port
Enter the port number of the computer that hosts the CCS Application Server. By default, the port is 1431.
Click to launch the CCS Console.
Go to the System Topology > Grid View or System Topology > Map View.
Right-click the CCS Manager and click .
In the Edit Settings dialog box, in the left pane, under Symantec CCS Manager, click .
On the CCS Manager - Basic panel, click the roles to assign the CCS Manager to.
If the CCS Manager is assigned to the CCS Manager Collector role, select the data collectors to enable on the CCS Manager.
If you want to configure the CCS Manager for message based data collection, enter the ESM password to enable message based data collection. Confirm the ESM password, and then click
You need to provide the ESM password while registering a CCS Agent for message based data collection.
Click to save the changes.
Thanks for your feedback. Let us know if you have additional comments below. (requires login)