As your system operates over time, you may need to add network scanners to protect additional networks. To add a network scanner to an existing Symantec Advanced Threat Protection (ATP) management platform/network scanner configuration, install the new scanner as you would any other physical or virtual appliance. During bootstrap, you specify all the information the network scanner needs to establish a connection to the management platform.
After bootstrap is complete and the network scanner restarts, the management platform downloads the default configuration to the network scanner. When this download is complete, the new network scanner appears in ATP Manager. You can then customize the Appliances settings for the network scanner and enable scanning.
If the network scanner does not appear in ATP Manager within 10 minutes after bootstrap completes, check the network connections. If the connections are correct, re-run bootstrap to ensure that you entered the correct gateway address, management platform IP address, and communications channel password.
Subscribing will provide email updates when this Article is updated. Login is required.