Plug an Ethernet cable into the management port and connect the other end to your Management network.
For Tap mode, you can connect the Monitor1 port to a Tap/Span port on a switch or router. For a management platform, do not make this connection.
For an appliance to operate in Inline Block or Inline Monitor mode, connect the WAN port to the server that hosts the firewall.
Connect the LAN port to the corporate LAN for Inline Block or Inline Monitor mode. Connect it to a Tap/Span port on a switch or router for Tap mode. For a management platform, do not make this connection.
If the appliance is deployed in Inline Block or Inline Monitor mode, bypass mode starts operating.
Configure the iDRAC using an external monitor and keyboard.
Open a browser from a computer that is on the same network as the appliance, and then type https://<iDRAC management port static IP address>. The iDRAC default logon is root; the password is calvin. From the iDRAC management utility, open a console to the appliance. Log on with the user name admin and the password symantec to start the bootstrap process. After you complete and accept the bootstrap configuration, the system restarts.