Symantec Endpoint Detection and Response physical appliances include an integrated Dell Remote Access Controller (iDRAC). This controller provides (among other features) remote console access to the appliance. Before you can connect an Symantec EDR physical appliance to your network using bootstrap, you must first assign a network address to the iDRAC.
The following procedures describe how to assign a static IP address to the iDRAC:
On the Symantec EDR model 8880, the IP address can be assigned to the iDRAC. Assign the IP address either by using the front panel controls or by attaching a monitor, keyboard, and optional mouse to the appliance. Then use the System Set-up utility. Symantec EDR Model 8840 does not have front panel iDRAC controls, so you must configure the IP address using the System Setup utility.
For more information on iDRAC features and operation, refer to the integrated Dell Remote Access Controller documentation at http://dell.com/support/manuals.
Subscribing will provide email updates when this Article is updated. Login is required.