Produce an encrypted backup archive (specify yes or no).
--host=
Specify the remote storage host.
--user=
Specify the user name for authentication with the remote machine, for example, FTP user or SSH user, depending on the chosen protocol.
--password=
Specify the password of the user for authentication with the remote machine, for example, the FTP user password or the SSH user password, depending on the chosen protocol. If SSH is chosen as the protocol and SSH public key authentication is selected, this password protects the RSA private key.
--path=
Specify a directory on the remote storage host.
--protocol=
Specify the protocol to transport backup data: FTP or SCP.
Note:
Specify the protocol name in lowercase characters.
--port=
Specify the port that the protocol uses. Use 21 for FTP, 22 for SCP.
--localuser=
Specify the local user name if SSH public key authentication is desired, as opposed to password authentication. Only applicable to SCP protocol.
--test
Verify remote backup mechanism works. This option transfers a test file to the remote storage with the specified options, but not with the actual backup data. If the test is successful, a message with a result of 0 is displayed. A result other than 0 means the test failed. The test file is automatically deleted.
Legacy ID:
v117597490_v128921691
Subscribing will provide email updates when this Article is updated. Login is required.
Thanks for your feedback. Let us know if you have additional comments below. (requires login)