How to check Symantec Brightmail Gateway is synchronizing with NTP server
Last Updated July 28, 2012
You set Symantec Brightmail Gateway (SBG) to use NTP server for time synchronization. After the NTP server is specified from control center on the path: [Administration] -> [Configuration] -> select the host and click [Edit] -> [DNS/Time] tab, you want to know if SBG is synchronizing with the NTP server with no problem.
The following methods can be used with admin account.
1. Login to SBG via SSH or local console with admin account. 2. Run the following command to check the current time to verify that the date and time is not drifting too much and is close to the current time.
3. As NTPD deamon activities will be logged to messages log, we can filter according information from the message log. The following command will filter messages log with the keyword of the NTP server's IP address. The description of "synchronized to 10.200.89.156, stratum 11" is telling us that SBG is synchronized with NTP server.
> cat /data/logs/messages | grep 10.200.89.156 2011 Nov 14 16:14:11 (notice) ntpdate: step time server 10.200.89.156 offset -0.003203 sec 2011 Nov 14 16:18:31 (info) ntpd: synchronized to 10.200.89.156, stratum 11 2011 Nov 14 16:59:21 (info) ntpd: synchronized to 10.200.89.156, stratum 11
Imported Document ID: HOWTO61232
Subscribing will provide email updates when this Article is updated. Login is required to Subscribe