(all Intel AMT versions)
Manual initialization of Intel AMT computers is performed at the computer location and, in most cases, requires an administrator to physically touch the computers.
If you have a large number of Intel AMT 3.0 or later computers, we recommend that you initialize the computers using the Remote Configuration feature.
See Initializing Intel AMT computers using the Remote Configuration feature.
You can initialize Intel AMT computers manually in the following ways:
Ask an OEM to prepare computers for initialization
See Initializing OEM-prepared computers manually.
Use a USB key
See Initializing computers manually using a USB key.
Type PID-PPS pairs into the MEBx
See Initializing computers manually through MEBx.
The USB and MEBx methods require you to visit each Intel AMT computer's location and perform some manual configuration.
See Configuring Intel AMT computers for out-of-band management.
Subscribing will provide email updates when this Article is updated. Login is required to Subscribe
Thanks for your feedback. Let us know if you have additional comments below. (requires login)
This will clear the history and restart the chat.