Configuring IPv4 and IPV6 sockets for communication
You can configure the CCS Manager or CCS Agent service to listen on IPV4 socket, IPV6 socket or dual stack (IPV4 and IPV6) in your setup. The operating system can be one of the following:
Windows 2003
Windows 2008
Following are the sockets that the CCS Manager service or CCS Agent service listens on for various types of installation :
Table: IPV4 and IPV6 settings
Installation on Operating system |
IPV4 |
IPV6 |
Dual |
Manager + Agent on Windows 2003 |
0 |
1 |
0 |
Manager + Agent on Windows 2008 |
0 |
1 |
2 |
Agent only installation on any platform |
0 |
2 |
0 |
0 = CCS service listens on pure IPV4 socket.
1 = CCS service listens on pure IPV6 socket.
2 = CCS service listens on both IPV4 and IPV6 sockets.
You can set the IPV6_SERVER flag in the tcp_port.dat file, to listen on a particular port.
The tcp_port.dat file is located in the <Installdir>\config\ folder.
See Setting the IPV6_SERVER flag.
Thanks for your feedback. Let us know if you have additional comments below. (requires login)