You must have Full Administration rights or Manage Settings modify rights to add a Scanner.
None of the settings that you specify throughout the wizard are final until you click Finish at the end of the wizard.
To add a Scanner through the Control Center
On the Control Center, click Administration > Hosts > Configuration.
If this Scanner is the first Scanner that you add, the Add Scanner wizard appears. Otherwise, on the Host Configuration page under Reconfigure a Scanner or Control Center host, click Add.
On the Add Scanner Wizard page, click Next.
On the Scanner Host Settings page, do all of the following:
In the Host description box, type a description for the new Scanner.
In the Host name or IP address box, type the host name or IP address for the new Scanner.
On the License Registration page, click Browse to locate your license file.
Select your license file and click Open to return to the License Registration page.
If your Scanner uses a proxy server for communications with Symantec, click Proxy Server.
To specify a proxy server, check Use HTTP Proxy and type the server host name and port.
Click Register License.
If registration was successful, the License Registration page returns.
If the license registration fails, perform troubleshooting steps.
See Troubleshooting license file registration.
If you have another license file for a different feature, repeat the process for registering each license.
When all the license files are successfully registered, click Next.
If your software needs to be updated, the Software Update page appears. If not, proceed to step 14.
On the Software Update page, select any of the following options:
Lets you update your software later.
Updates your software now. After the update, the setup wizard returns you to the Time Settings page.
Returns you to the License Registration page.
See Registering your license.
On the Time Settings page, verify whether the date in the Current Appliance Time area is correct. Select one of the following options:
Do not change the time
The time is correct and you do not want to make changes. This option is the default setting.
Set time manually
You want to manually change the time. Type the proper values in the Date and Set Time fields.
Use NTP servers
You want to use NTP servers to manage time. Click and provide the IP address for up to three NTP servers.
To complete the Add Scanner wizard, you must now configure the Scanner based on its function.
See Configuring the Scanner for inbound and outbound mail filtering.
See Configuring the Scanner for inbound mail filtering only.
See Configuring the Scanner for outbound mail filtering only.
Subscribing will provide email updates when this Article is updated. Login is required to Subscribe
Thanks for your feedback. Let us know if you have additional comments below. (requires login)
This will clear the history and restart the chat.