Symantec Messaging Gateway can monitor USB attached APC UPS devices. It can also perform a graceful shutdown due to loss of power when any one of the following conditions are met:
If during a power failure, the remaining battery percentage (as reported by the UPS) is less than or equal to the specified value
If during a power failure, the remaining runtime in minutes (as calculated internally by the UPS) is less than or equal the specified value
If during a power failure, the UPS has run on batteries for the timeout minutes
If you have a Smart UPS, you can disable the Timeout minutes feature and use the other settings to control when a shutdown is initiated.
To configure UPS settings
In the Control Center, click Administration > Settings > UPS.
Check Enable UPS Monitoring and select the conditions under which the appliance turns itself off.
Subscribing will provide email updates when this Article is updated. Login is required to Subscribe
Thanks for your feedback. Let us know if you have additional comments below. (requires login)
This will clear the history and restart the chat.