Workflow video library
HOWTO93127
Last Updated May 20, 2014
readonly
This following table lists videos that are available on Symantec Connect.
For an updated list, see the following link. To filter for Workflow, select Workflow Solution in the All Products drop-down.
www.symantec.com/connect/endpoint-management/videos
You can also join the Workflow Group on Connect and subscribe to receive updates for all new videos, articles, and templates.
www.symantec.com/connect/ogproduct/symantec-workflow
Table: Workflow video library
Title |
Description |
URL |
|---|---|---|
Publishing a Workflow Project (Part 1) Video |
This is an introduction video that walks through the process of publishing a Workflow project. Publishing is the act of moving a project from the test environment to the production environment so that it can be shared and run on other Workflow servers that are added to the task tray application.In this video, you will learn the basics of publishing a Workflow project, and different options and formats that are available for publishing a Workflow project. To publish a project, in an environmental setup, a machine where Workflow solution is installed is required. |
www.symantec.com/connect/videos/publishing-workflow-project-part-1-video |
Publishing a Workflow Project (Part 2) Video |
This is a how to video on creating and executing an installation file for publishing a Workflow project. After you create an installation file, you can run the file to publish the Workflow project on any computer that has Workflow Server installed on it. To publish a project, in an environmental setup, a machine where Workflow solution is installed is required. |
www.symantec.com/connect/videos/publishing-workflow-project-part-2-video |
Publishing a Workflow Project (Part 3) Video |
This is a how to video on publishing a Workflow project on local or remote standalone Workflow Servers. These servers can exist in one or more environments that are set up in the Symantec Management Platform. In this video, you will see an example of publishing an event listener project. |
www.symantec.com/connect/videos/publishing-workflow-project-part-3-video-0 |
Publishing a Workflow Project (Part 4) Video |
This is a how to video on publishing a Workflow project to Process Manager Forms, which creates a link in the Process Manager service catalog. The project is published to Workflow Server, but the link is created in the service catalog so that the project can be launched through the Process Manager. |
www.symantec.com/connect/videos/publishing-workflow-project-part-4-video |
Adding Custom JavaScript in Workflow Web Forms Video |
This is a how to video on adding custom JavaScript to Workflow Web Forms. You will see how to add custom JavaScript to Workflow form controls and how this behaves at runtime. Some knowledge of JavaScript is required before completing this video. |
www.symantec.com/connect/videos/adding-custom-javascript-workflow-web-forms-video |
Using the Web App Project Type in Workflow Video |
This is a how to video on using the Web App Project Type that was introduced in Workflow 7.5. In this video, you will learn about the Web App Project type and see how to create and configure it.The Web App project type allows Workflow, Dialog, and Service models in the same project. It gives you complete control of how the project is consumed by allowing you to define multiple web pages and services. It can also invoke a Workflow model from another model type. |
www.symantec.com/connect/videos/using-web-app-project-type-workflow-video |
Create a Workflow using the Service Catalog Request Template - Part 1 |
This four part video series will demonstrate how to utilize the Service Catalog Request Template to create a fully functional Request, Approval, and Fulfillment process from scratch in less than an hour. See this video for links to steps 2-4. |
www.symantec.com/connect/videos/ create-workflow-using-service- catalog-request-template-part-1 |
Using the Script generator in Workflow |
This is a how to video on using the Script Generator in Workflow. In this video, you will see how to create an "even or odd" multipath component and use the component in a workflow. Note: Completing the steps in this video and using the Script Generator requires some knowledge of C#. It would also be helpful to understand the Workflow component API. |
www.symantec.com/connect/videos/ using-script-generator-workflow |
Using the Report Generator in Workflow |
This is a how to video on using the Report Generator in Workflow. In this video, you will see how to generate a component against an existing SMP report and use the generated component in a workflow. |
www.symantec.com/connect/videos /using-report-generator-workflow |
Getting Started with Workflow : Installation |
This is a how to video on installing Workflow. In this video, you will review each of the selections for a basic installation, see how to quickly set up a Workflow Server for development and testing, and learn about tools for getting started with Workflow. |
www.symantec.com/connect/videos /getting-started-workflow- installation |
Creating and Executing SMP Tasks in Workflow |
This is a how to video on creating and executing Symantec Management Platform tasks in Workflow. In this video, you will learn how to create, import, and execute SMP tasks. You will also see the details of each component in the workflow that is used. |
www.symantec.com/connect/videos /creating-and-executing- smp-tasks-workflow |
Active Directory Sync Setup in Workflow Process Manager |
This is a how to video on Active Directory Sync Setup in Workflow Process Manager. This allows you to import your domain users and groups, which allows users to use their domain credentials. In this video, you will see how to add credentials, create a sync profile, create a schedule to run the sync profile, and test the setup by running a full sync. This video also has a section at the end for advanced users on how to specify LDAP queries to fine-tune the users or groups you bring into Process Manager. |
www.symantec.com/connect/videos /active-directory-sync-setup -workflow-process-manager |
Using Advanced Math the 'Easy Way' in Workflow Solution |
This is a how to video on using advanced math the 'easy way' in Workflow Solution. In this video, you will see how to run through the formula component editor, test the formula component, and use the formula component in a workflow. This video will not cover advanced math that requires you to know C# or the Workflow component API. |
www.symantec.com/connect/videos /using-advanced-math- easy-way-workflow-solution |
Using the Filter Generator in Workflow Solution |
This is a how to video on using the filter generator in the Workflow Solution. In this video, you will see how to create a filter generator integration library, import the library into the Process Manager, and use a new filter for generating a UserPhoneNumber report. |
www.symantec.com/connect/videos /using-filter-generator -workflow-solution |
Extending Mobile Management Solution with Workflow |
This is a video showing a general overview of the Mobile Bulk Actions workflow process and a deeper dive into the underlying Workflow and how it hangs together. |
www.symantec.com/connect/videos /demo-extending-mobile- management-solution-workflow |
Editing Assets with the NS Resource Model and Workflow |
This 13-minute video shows two examples of editing Altiris assets using Workflow in conjunction with the NS Resource Model. Specifically, the first example dynamically updates the serial number of a computer, while the second example adds a new cost item to an asset in the CMDB. The sample project that was designed for the video is available for download as well. |
www.symantec.com/connect/videos /editing-assets-ns-resource -model-and-workflow |
Workflow Panels and Form Visibility |
This video demonstrates how to create dynamic web forms. Specifically, it shows how to organize sections and groups of related components on a web form with panels, and then how to have a radio button selection change which panel is shown and which is hidden. It also demonstrates how to use custom events to have a selection on one control disable or hide another control. Using these techniques, you can more effectively present the appropriate controls and labels on a single form based on previous data entry and selections. |
www.symantec.com/connect/videos /workflow-panels-and-form- visibility |
Majority Approvals in Parallel Workflow |
This video demonstrates how to use the Embedded Merge Component to wait for a configurable scenario to occur before advancing further into the project. For example, waiting for 3 out of 5 CAB members to approve or reject a request before proceeding. |
www.symantec.com/connect/videos /majority-approvals-parallel-workflow |
Get Active Directory Reports in AD with Workflow |
This video will demonstrate how to get a manager's direct reports out of Active Directory . |
www.symantec.com/connect/videos /get-active-directory-reports -ad-workflow |
Process Manager Reporting Using External Data |
If you've done Process Manager reporting in the past, you're probably aware of how to build and customize reports using Process Manager data. But did you know you can use the exact same GUI report-writer to create reports against your own custom data source and database queries? This video shows you how to do just that. |
www.symantec.com/connect/videos /process-manager-reporting-using -external-data |
Workflow and UNIX (via SSH) |
This video shows you how to run dynamic commands against a UNIX or Linux server from your Symantec Workflow process. The commands are run using the SSH protocol (via the command-line plink.exe from Quest) so that all communications between the Workflow and UNIX server are secure. The video walks you through a simple example to run a UNIX command on the target server, illustrating the flexibility of Symantec Workflow to interact with even non-Windows environments. |
www.symantec.com/connect/videos /workflow-and-unix-ssh -updated |
Automating Tasks in the Notification Server with Workflow |
This video shows you how to automate a client-side task or job from the Symantec Management Platform using Workflow. |
www.symantec.com/connect/videos /automating-tasks- notification-server-workflow |
AD Self-Service Password Reset with Workflow Solution (Part 1) |
This video shows an example of an Active Directory self-service password reset workflow. Part 1 shows a demonstration of the process. Part 2 then shows how to implement the project in your own environment. See this video for a link to part 2. |
www.symantec.com/connect/videos /ad-self-service-password- reset-workflow-solution-part-1 |
Imported Document ID: HOWTO93127
Legacy ID:
v80741544_v66564686
Subscribing will provide email updates when this Article is updated. Login is required.
Subscribed to the Article.
Unable to subscribe
Thanks for your additional feedback !!!
Enterprise Support Virtual Agent
Rate Me :
Tell us more:
Welcome! My name is Sami, the Enterprise Support Virtual Agent answering technical support questions.
Start Over
This will clear the history and restart the chat.
Thanks for your feedback. Let us know if you have additional comments below. (requires login)