SGME 6.1.15.1 is a limited availability (LA) release, available as of October 30, 2014.  To download this release, log in to BlueTouch Online (BTO) and click Downloads.
SGME 6.1.15.1 is a limited availability (LA) release that includes the following new features:
  • Director now supports Cisco ACS 5.4. Blue Coat tested ACS version 5.4.0.46.0a.
  • Director now supports TACACS+ authorization.
For more information on these changes, search for the following articles in the Blue Coat Knowledge Base:
Before upgrading, refer to the relevant release notes. Log in to BTO and click Downloads. The release notes are posted with the release.

Search for Director product documentation at:
https://bto.bluecoat.com/documentation/All-Documents/Director
 
Blue Coat is aware of the following issues in this release:
  • Interface configuration is not saved after upgrading to this release. This occurs if the IP address was not configured for the interface during initial setup (for example, you configured the IP address subsequently through the CLI).
Workaround: After upgrading to this release, configure the IP address for the interface again.(B#210352)

In addition, SGME 6.1.15.1 fixes the following issues:

  • RADIUS authorization now works correctly. Previously, all users had level 15 privileges after logging in. Set up RADIUS authentication to Director on Cisco ACS server has been updated with this information. (B#207573, SR 2-986504152)
  • The Blue Coat WebFilter (BCWF) database has been updated. (B#207514)
  • Director documentation has been corrected to indicate that the ether-1 interface is not supported in Director 6.x. (B#209915)
Imported Document ID: 000022029

Thanks for your feedback. Let us know if you have additional comments below. (requires login)

    © 1995-2019 Broadcom. All Rights Reserved. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.