SGOS 184.108.40.206 and later include a way for you to validate your SGOS system image and bootchain on the ProxySG appliance. After you upgrade to SGOS 220.127.116.11 or later, you can use the show installed-systems verbose CLI command to display the image signature. You can then compare the signature displayed for each release against a list of valid signatures posted on BTO.
Important: This method is available for the ProxySG 300, 600, 810, 900, 9000, S-Series, MACH5 VA, and SWG VA platforms. In addition, system image signatures for releases prior to SGOS 6.5 are not always displayed in the show installed-system verbose output. The signatures on BTO that you can use for comparison are available only for SGOS 6.5.x and later releases.
For more information, please see the Blue Coat knowledge base article at http://bluecoat.force.com/knowledgebase/articles/Solution/000024130.
All SGOS 18.104.22.168 documentation is located on BTO at:
The core set of SGOS documentation has been updated for this release:
The Visual Policy Manager Reference and Command Line Interface Reference documents on BTO include the correct CLI commands for enabling/disabling quotas.
Subscribing will provide email updates when this Article is updated. Login is required.
Thanks for your feedback. Let us know if you have additional comments below. (requires login)
This will clear the history and restart the chat.