Can the GhostCast server work on a machine with multiple NICs?
Last Updated January 09, 2019
You need to know whether Ghost Multicast Server will run on a computer that has multiple network interface cards (NICs), or you are already running Ghost Multicast Server on a computer that has multiple NICs and are having problems. When there is a NIC Teaming done, Ghost cast session - Multicast, clients are unable to connect to the session. We receive an error within the GHOSTERR.txt as below
Ghost Solution Suite 2.x and 3.x
Ghost Standard tools 2.x and 3.x
Error Number: 10030
Message: Unable to establish contact with session <testsession>.
Check that the GhostCasting Server application is ready
to accept clients!
Version: 18.104.22.16821(Dec 11 2015, Build=8021
OS Version: Professional (Build 9200)
Command line arguments: -clone,mode=restore,src=@mctestsession,dst=1
NIC Teaming is not supported as of now.
In older versions of Ghost, Ghost does not support running Ghost Multicast Server on a computer that has multiple NICs. To resolve the problem, remove all NICs but one before running Ghost Multicast Server.
In newer versions, multiple NICs should work successfully if they are not teamed.
If you have multiple NICs and are having connection issues, you will need to test by disabling each of the NICs then testing Ghost. Note: The Console does not decide which NIC to use on the Console, but rather lets the OS select based on availability and therefore determine which NIC does the work at any given moment. The solution is to disable all but one NIC in the Console machine which allows Windows only one choice. An enhancement is already logged to have a setting in the console that will set which NIC to use at any given time.
In some cases, turning off the firewall allowed both NICs to be used.
Some Vender supplied teaming software can modify the way a teamed NIC environment will function. In some cases it will improve the situation and in come cases removing the vender supplied software will improve the situation. Both should be tested to find the combination that will work best for the environment until such a time that teaming and multiple nics are supported.
------- Symantec has acknowledged that the above-mentioned issue is present in the current version(s) of the product(s) mentioned at the end of this article. Symantec is committed to product quality and satisfied customers.
There are currently no plans to address this issue by way of a patch or hotfix in the current or previous versions of the software at the present time. This issue may be resolved in a future major revision of the software at a later time. However, this particular issue is not currently scheduled for any release. If you feel this issue has a direct business impact for you and your continued use of the product, please contact your Symantec Sales representative or the Symantec Sales group to discuss these concerns. For information on how to contact Symantec Sales, please refer to the following Web site: