After deploying an image, when the computer tries to boot to production to do post configuration, it blue screens with a stop code 0x0000007B.
There is a hardware conflict that is incompatible with the image that is being pushed. This is not allowing the newly imaged computer to boot to production and is causing the blue screen.
In this instance, a bad image file was sent from the hardware manufacturer which was incompatible with the hardware. But the issue could occur with a locally captured image as well.
Option 1: Capture an image from the same hardware and deploy that image.
Option 2: It also may be possible to deploy the incompatible image with DeployAnywhere.
Option 3: Change BIOS SATA controller mode settings under the Advanced menu from AHCI to Compatibility mode. For further details, please click on the following link:
All versions of Deployment Solution
Subscribing will provide email updates when this Article is updated. Login is required to Subscribe
Thanks for your feedback. Let us know if you have additional comments below. (requires login)
This will clear the history and restart the chat.