This document lists new fixes and features in Symantec Endpoint Protection 12.1 Release Update 1 (SEP 12.1 RU1) and Symantec Network Access Control 12.1 Release Update 1. This information supplements the information found in the Release Notes. The Release Notes can be found at http://www.symantec.com/docs/DOC4889.
This is a summary of the feature updates in SEP 12.1 RU1. For full details, read the Release Notes at http://www.symantec.com/docs/DOC4889.
FIPS 140-2 level 1 compliance
You can deploy Symantec Endpoint Protection with a FIPS-compliant configuration to protect its server-to-server and console-to-server communications.
Support for additional operating systems
Symantec Endpoint Protection Manager supports Windows Small Business Server 2003. The Symantec Endpoint Protection client now supports the following operating systems:
The Symantec Endpoint Protection Macintosh client and the Symantec Network Access Control On-Demand Client for Macintosh now support Mac OS 10.7 Lion.
Support for additional portals in Download Insight
Download Insight supports the following new portals in Release Update 1:
Support for updated legacy and migrated clients
Symantec AntiVirus for Linux 1.0 is updated to Maintenance Release 12 (version 1.0.12).
The legacy Symantec Endpoint Protection client is updated to 11.0 Release Update 7 (version 11.0.7000).
Improved security and performance
Release Update 1 includes the following enhancements:
The following table shows version information for different components of SEP 12.1 RU1:
|AV Engine Driver||2011.2.0.82|
|BASH Defs Driver||22.214.171.124|
|CIDS Defs Driver||10.0.4.51|
|LiveUpdate Express (client)||126.96.36.199|
The following changes are highlighted, as they may require the Symantec Endpoint Protection (SEP) administrator to make a policy or procedural change to match the behavior of the previous release. Some changes may allow the administrator to add functionality that was not present in the previous release.
The network application monitoring feature is configured to "ask" by default on SEP 12.1 Small Business Edition
Fix ID: 2515014
Symptom: In SEP 12.0 Small Business Edition (SBE), the network application monitoring feature was set to "allow" by default. In SEP 12.1 Small Business Edition it is configured to "ask" by default. In both products it is not possible to change the value on the client.
Solution: The network monitoring feature is now disabled on installation or migration to 12.1 SBE.
Administrator cannot set the heartbeat to longer than 60 minutes
Fix ID: 2492263
Symptom: Upon installing SEP 12.1, the Symantec Endpoint Protection Manager (SEPM) administrator cannot set the heartbeat longer than 60 minutes.
Solution: The maximum number of heartbeat minutes was increased to 2,880.
Small Business Edition client reboots without prompting
Fix ID: 2437682
Symptom: After auto-upgrade, Small Business Edition clients automatically reboot when no user is logged in.
Solution: On server class operating systems, SEP Small Business Edition no longer automatically reboots. There is no reboot prompt, and the computer does not reboot. The status "needs reboot" is passed to the management server.Purging of stale clients cannot be configured by domain
Fix ID: 2424460
Symptom: The ability to purge stale clients cannot be configured by domain.
Solution: Purging of stale clients can now be configured per domain.
SEPM installation automatically creates database maintenance jobs, which may conflict with previously-created jobs
Fix ID: 2428340
Symptom: During the installation of SEPM, the installer creates several database maintenance jobs. These jobs may conflict with other jobs that were previously created by the database administrator.
Solution: The SEPM installation and configuration wizard was modified to allow the administrator to enable or disable the database maintenance jobs when creating a new site.
Administrator is prompted for credentials after logging on to the SEPM console
Fix ID: 2533910
Symptom: After logging on to the SEPM console, accessing any Reporting page prompts the administrator to enter the password again. This issue occurs when the server host name contains an underscore (_) character. The message displayed is "Login failed due to invalid user name or password." The reporting.log file contains the entries:
ERROR 0002: user_name does not exist.
ERROR 0002: user_name does not exist.
Solution: Server reporting was modified to allow host names with an underscore (_) character.
SEPM Configuration wizard fails if the SEM5 user already exists
Fix ID: 2435859
Symptom: SEPM cannot reuse the existing DB user account when running a fresh install with a new SQL Server database.
Solution: Reuse of an existing DB user account is now allowed when installing SEPM and creating a new database.
"Remote host name" column is not present in the exported NTP Traffic Log
Fix ID: 2513023
Symptom: The "Remote host name" column is missing from the exported NTP Traffic log. This column exists in SEP 11.0.
Solution: The "Remote host name" column was restored for exported NTP traffic logs.
Application and Device Control will incorrectly block a USB device when connected for the first time
Fix ID: 1284681
Symptom: USB hub devices are incorrectly blocked and devices attached to the hub are not recognized.
Solution: USB hub devices are no longer blocked by default. SEP only blocks child devices of USB hubs. If the Application and Device Control policy is specifically configured to block the USB hub, all child devices are also blocked.
Firewire device is incorrectly listed as "1394 FireWire Host Controller"
Fix ID: 2336000
Symptom: In a policy component, the Firewire hardware device is incorrectly shown as "1394 FireWire Host Controller."
Solution: The device text was changed from "1394 FireWire Host Controller" to "1394 FireWire Devices."
Download Insight does not display a system tray notification
Fix ID: 2427271
Symptom: When Download Insight detects a threat, there is no immediate notification to the user.
Solution: Download Insight now displays a system tray pop-up notification to alert the user that a remediation is in progress.
When File System AutoProtect non-viral threat actions are set to Quarantine/Deny Access, AutoProtect always denies access and never tries to quarantine. If the file is newly created, AutoProtect deletes the file.
Fix ID: 1954266
Symptom: You configure File System AutoProtect actions to Quarantine/Deny Access on non-viral threats. When a non-viral threat is accessed, AutoProtect denies access but does not attempt to quarantine per your configuration.
Solution: The interaction between the SEP client and File System AutoProtect was modified to better process these types of threats. Specific changes:
SEPM does not block installation on a hostname with an underscore character
Fix ID: 2436942/ 2436959
Symptom: The SEPM installer does not block installation when the server’s hostname contains one or more underscore (_) characters.
Solution: The SEPM installer was modified to warn the user before migration if the hostname contains an underscore character.
Unable to determine the Release Update number from Help > About
Fix ID: 2355966
Symptom: The Help > About window displays a version, for example 12.1.671.4971. It does not display the Release Update number.
Solution: Added a Release Update number to the Help > About window, for example “RU1.”
Clients lose protection technologies after SEPM is migrated from 11.x to 12.1
Fix ID: 2436468
Symptom: Symantec Endpoint Protection Manager is migrated from 11.x to 12.1. Existing 11.x clients receive a policy that incorrectly instructs them to change feature states, removing some or all protection technologies. This problem is encountered only if an 11.x package is previously deployed with the "maintain existing feature states" option.
Solution: The 11.x client installation feature states were not correctly mapped to the 12.1 feature states in the policy file. The mapping was modified to resolve this issue.
Content appears “out of date” when clients have up-to-date content
Fix ID: 2436471
Symptom: The Download Protection Content report shows a failure, with out-of-date content, when the clients have up-to-date content.
Solution: The method that SEPM uses to calculate content dates was modified to correct this issue.
Cannot open the SEP 12.1 user interface after migration from SEP 11.x to 12.1
Fix ID: 2491486
Symptom: When the Application and Device Control rule "Protect client files and registry keys" is enabled before migration, after migration to SEP 12.1, the client user interface cannot be opened. Attempting to open the user interface results in the message "Symantec Endpoint Protection cannot open because some Symantec Services are stopped. Restart the Symantec services, and then open Symantec Endpoint Protection."
Solution: The Application and Device Control rule is now converted from SEP 11.x format to SEP 12.1 format during migration. This allows the user interface to open correctly.
Check Point VPN cannot start or terminates unexpectedly when SEP 12.1 is installed
Fix ID: 2494474
Symptom: The Check Point VPN cannot start or terminates unexpectedly when SEP 12.1 is installed on the client.
Solution: The SymTDI driver was modified to prevent this crash.
Unable to disable the "Threats were detected while you were logged out" message
Fix ID: 2608606
Symptom: When a virus is discovered as part of a scheduled scan while the user is logged out, they are notified that threats were discovered when they log in, even if notifications are disabled. It is not possible for the administrator to disable this message.
Solution: The SEP client was modified to honor the notification settings that are configured by the administrator. If notifications are disabled, the message no longer appears.
SONAR definitions display as "out of date"
Fix ID: 2522692
Symptom: When SONAR definitions are up-to-date, they display as “out-of-date” on the SEPM server.
Solution: The SONAR definition version was not formatted correctly in the database. The formatting was resolved to prevent this issue.
SEPM uninstall deletes an ODBC entry in the System DSN
Fix ID: 2522832
Symptom: Uninstallation of SEPM incorrectly deletes a System DSN ODBC entry that is not used by SEPM.
Solution: The SEPM installer was modified to only remove the SymantecEndpointSecurityDSN registry key during uninstallation.
SEPM client view does not display all pages correctly
Fix ID: 2568046
Symptom: In the SEPM client view, some pages are blank in all views except Network Information or Client System. The "missing" clients are able to check in and communicate with the server.
Solution: The SEPM console was modified to prevent a condition where the client reboot status prevented it from appearing in the view
SEP clients cycle through Management Server lists continuously
Fix ID: 2569442
Symptom: SEP clients continually cycle through the Management Server Lists. The client will connect to one SEPM, then another, and repeat.
Solution: The profile time is now converted to GMT to resolve a scenario where the profile does not match.
CPU load is high on the host in a virtual environment when guest virtual machines are idle
Fix ID: 2413588
Symptom: CPU usage of WmiPrvse, “SvcHost –netsvcs” and System are significant when the client is idle. The result is high overall CPU of the host computer in a virtualized environment.
Solution: To reduce resting CPU usage, the SEP client was modified to reduce polling intervals and register for additional notification changes when appropriate.
Some applications fail to launch on Windows XP 32-bit when Application and Device Control is enabled
Fix ID: 2423743
Symptom: ThinApp version of Internet Explorer 8 and Adobe Updater fail to launch on Windows XP 32-bit operating systems when Application and Device Control is enabled.
Solution: The Sysplant.sys driver (Application and Device Control) was modified to correct an issue that prevented these applications from launching correctly.
Unable to upgrade SEPM from 11.x to 12.1
Fix ID: 2436198
Symptom: Upgrade of SEPM from version 11.x to 12.1 fails. The upgrade log contains the following entries:
WARNING: AgentManager>> deleteComputerAndAgentByComputerId: Done! can't delete because there are some attached clients! count=1
WARNING: java.sql.SQLException: Network error IOException: Address already in use: connect
Solution: Ephemeral ports were exhausted during upgrade due to multiple SQL database connections. The migration process was modified to reuse the USN during upgrade so a new database connection is not created for every record update.
Reboot prompt does not appear on the client when migrating from 12.0 SBE to 12.1 SBE
Fix ID: 2436381
Symptom: When using the Client Deployment Wizard to migrate from 12.0 Small Business Edition to 12.1 Small Business Edition, the client does not correctly display the reboot prompt.
Solution: The Client Deployment Wizard was modified to prevent a situation where the some installation files could be removed before the end of the setup. The Client Deployment Wizard was also modified to prevent a situation where incorrect switches were passed to msiexec.
Upgrading SEPM from 11.x to 12.1 fails with installation rollback
Fix ID: 2440655
Symptom: During server upgrade from 11.x to 12.1, the migration fails with a database connection error, and the installation rolls back. The server log contains the messages:
INFO: Process SQL script file:MSSQLServerAmberMisc.sql
SEVERE: SQL Exception
Solution: During migration of databases on SQL Server 2005 and 2008, table indices are temporarily disabled on the computer_application and sem_application tables. Table indices are re-enabled after migration.
Network connectivity is lost after installing SEP 12.1 on a client running Microsoft Windows Live OneCare 2.x
Fix ID: 2479660
Symptom: After installation of SEP 12.1 on a computer already running OneCare 2.x, network connectivity is lost. The user cannot connect to the internet or shared drives.
Solution: The sysplant.sys driver (Application and Device Control) was modified to allow OneCare 2.x to load correctly.
Exception policy containing "\n" does not take effect
Fix ID: 2480315
Symptom: An exception policy containing the string "\n" does not take effect.
Solution: Parsing of the exception policy was corrected to resolve this issue.
Apache httpd.exe process crashes
Fix ID: 2484177
Symptom: The Apache httpd.exe process crashes every few hours after upgrading from SEP 11.x to SEP 12.1.
Solution: A string was not terminated correctly. The string is now terminated correctly.
The Doscan.exe "/list" parameter does not print the list of configured scans correctly on a Japanese operating system.
Fix ID: 2491231
Symptom: The Doscan.exe "/list" parameter does not print the list of configured scans correctly on a Japanese operating system.
Solution: The locale of DoScan.exe was corrected to convert the Unicode scan name data to the appropriate character set.
SEPM triggers unnecessary reinstallation or reconfiguration of clients when a client package is applied to a group
Fix ID: 2493977
Symptom: A package is deployed with "Full protection." When another package is added to the group with the option "do not maintain existing feature set," this triggers reinstallation and reconfiguration of the client.
Solution: The feature list is now calculated correctly when assigning a package.
SEP client notifies users about blocked devices when the notify option is disabled
Fix ID: 2494090
Symptom: The administrator has configured the Application and Device Control policy with the option to disable "Notify users when devices are blocked." On the SEP client, the user is incorrectly notified when a device is blocked.
Solution: The default client behavior is now "do not modify." The client was modified to honor the policy setting.
Application and Device Control policy rule does not work properly on some NEC computers
Fix ID: 2497343
Symptom: An Application and Device Control policy rule does not block or allow an encrypted USB device correctly on a NEC computer.
Solution: Encrypted USB keys are not added to the Application and Device Control cache until after they are activated.
Ping time increases every 5-10 pings when SEP 12.1 is installed
Fix ID: 2497875
Symptom: When SEP 12.1 client is installed, the ping time increases every 5-10 pings.
Solution: The SEP client was modified to increase performance of ping times.
Cannot change the SONAR setting after migrating from SEP 12.0 to 12.1
Fix ID: 2505139
Symptom: After migration from SEP 12.0 to 12.1, it is not possible to change the SONAR setting in the migrated policy.
Solution: The SONAR policy object is now configured correctly during migration.
Symantec Network Access Control (SNAC) Enforcer crashes while generating the server list
Fix ID: 2525069
Symptom: When a new management server list is applied to a Gateway Enforcer, the Enforcer may enter a crash loop until the server list is replaced.
Solution: A SNAC Enforcer buffer was modified to prevent a spinlock condition.
SNAC Enforcer disk space is depleted when the debug log is enabled
Fix ID: 2319926, 2407167
Symptom: When the SNAC Enforcer debug log is enabled, the Enforcer runs out of free disk space and no further entries can be written to the kernel log.
Solution: Debug logging now stops automatically if the free disk space is lower than 512 megabytes.
Apache httpd.exe process consumes 100% CPU after migration from SEP 11.x to 12.1
Fix ID: 2479435, 2489380
Symptom: Apache httpd.exe process consumes 100% CPU after migration from SEP 11.x to 12.1.
Solution: Access to a cache table was modified to prevent a condition in which multiple thread accesses resulted in an infinite loop.
A notification for "new risk detected" is triggered repeatedly, despite longer damper setting
Fix ID: 2497657, 2212158
Symptom: The damper setting on a notification for new risks is configured for a specific time value. The first risk triggers the notification correctly. Subsequent risks before the damper period time incorrectly trigger the notification.
Solution: The damper option on notifications was modified to prevent this issue.
SEPM application control log filter 'caller process' does not affect the data returned
Fix ID: 2535320, 2536938
Symptom: When filtering the application control log in SEPM, supplying a value for the caller process does not filter the resulting log data.
Solution: The caller process name is now inserted correctly into the DB query.
Gateway Enforcer blocks traffic in learning mode
Fix ID: 2517954
Symptom: When the Gateway Enforcer is in "learning mode," it incorrectly blocks traffic that should be allowed.
Solution: A driver was modified to resolve an issue with the packet length.
“Download Insight is malfunctioning” appears after upgrade from SEP 11.0 to SEP 12.1
Fix ID: 2496842
Symptom: When a SEP 11.0 client is upgraded to SEP 12.1, the following message appears in SEP UI:
Download Insight is malfunctioning
In addition, the event log contains the following error:
Event ID 74 "SONAR generated the error: code 0: explanation: Definition error"
Solution: If the SEPM database does not yet include LiveUpdate content, the auto-upgrade process copies the content from the full package to create a delta for the client.
SEPM client view does not sort clients correctly
Fix ID: 2579317
Symptom: In the SEPM client view, sorting does not work correctly on some columns, such as Policy Serial Number and IP address.
Solution: The SEPM console was modified to sort the columns correctly.
Some clients cannot pass authentication in "Built-in" transparent mode after upgrade from SEP 11.0 to SEP 12.1
Fix ID: 2579709
Symptom: After migration from SEP 11.0 to SEP 12.1, a client cannot pass authentication in "built-in" transparent mode. During migration, SNAC incorrectly restores the settings from HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Symantec Endpoint Protection\NAC\SNAC to HKEY_LOCAL_MACHINE\system\currentcontrolset\services\RASMAN\ppp\EAP
Solution: SNAC no longer restores the transparent mode registry during migration. The transparent mode settings have been moved to the SymRasMan component.
SEPM command status and details windows alternate focus back and forth
Fix ID: 2406154
Symptom: In the SEPM command status screen, when auto-refresh is configured and a details window is open, focus of the two windows may alternate back and forth.
Solution: The SEPM console was modified to refresh each page without alternating focus.
Estimated package size does not change between "all" and "basic" content types
Fix ID: 2406187
Symptom: When exporting a package from SEPM, there is a choice to select content for the package. For both "all content" and "basic content" the size is constant and does not change.
Solution: SEPM now correctly shows the estimated package’s size, dependent on content type selection.
Date format is inconsistent in SEPM console
Fix ID: 2406473
Symptom: The date format used in the SEPM console inconsistently uses both English (UK) format and English (American) format. English (American) format is used for client properties and the policy serial number. English (UK) format is used for virus definition date on the clients tab.
Solution: The SEPM console was modified to consistently use English (American) format when applicable.
"This webpage you are viewing is trying to close the window" is displayed after adding an application exception from the Tamper Protection log
Fix ID: 2407285
Symptom: SEPM displays a message "This webpage you are viewing is trying to close the window" after adding an application exception from the Tamper Protection log. The issue occurs if Internet Explorer 7 or 8 is installed. Both the Java console and the web console are affected.
Enterprise SEPM exports a Small Business Edition client
Fix ID: 2407293
Symptom: An Enterprise SEPM has applied a license that supports both Enterprise and Small Business. The Enterprise SEPM exports a Small Business client instead of an Enterprise client.
Solution: SEPM was modified to include the server's product type into the license data.
Number of trusted files shown in the client scan interface is different compared to the Windows event log
Fix ID: 2407331
Symptom: The number of trusted files shown in the SEP UI after a scan is different than the number shown in the Windows event log.
Solution: The number of trusted files is now calculated in a consistent way and matches in all locations.
Endpoint Status "view details" report shows IP address as X.X.X.255 for all clients
Fix ID: 2409780
Symptom: On the SEPM home page, the Endpoint Status "view details" report lists all clients with IP address ending in .255.
Solution: The SEPM console was modified to show the correct IP addresses for clients in this report.
SEPM home page displays out-of-date license information
Fix ID: 2414134
Symptom: The SEPM home page may display out-of-date license information after a new license is applied. The license information is corrected on the next automatic refresh.
Solution: SEPM was modified to refresh the home page automatically when a new license is applied.
Client Changes report displays duplicate clients
Fix ID: 2416097
Symptom: Clients that change groups are incorrectly shown in the "client changes" report, resulting in duplicate data.
Solution: Clients or users that change groups are no longer shown in the "client changes" report.
SEPM does not use the configured email server
Fix ID: 2417214
Symptom: In some cases, SEPM may send email directly to the recipient(s), instead of using the configured email server. The SEPM log may contain the message "Sending Email Failed for following email address…"
Solution: SEPM was modified always to use the configured email server.
Blue screen error referring to "sysplant.sys" occurs when running ThinApp version of Internet Explorer 6
Fix ID: 2424905
Symptom: A blue screen error that refers to "sysplant.sys" occurs when running ThinApp version of Internet Explorer 6.
Solution: The Application and Device Control Driver, sysplant.sys, was modified to prevent this crash.
Client inventory details report is truncated
Fix ID: 2425965
Symptom: The Quick Report for Computer Status > Client Inventory displays only the first half of the report.
Solution: SEPM was corrected to show the entire report.
Hyper-V host loses network connection when firewall is enabled
Fix ID: 2426193
Symptom: On a computer running as a Hyper-V host with a virtual network linked to a physical network card, when the firewall is enabled all network traffic on the host is stopped. Disabling the firewall and resetting the network connection returns the network to normal operation. Only the host is affected; virtual machine network access is not affected.
Solution: The Teefer.sys driver was modified to correct a compatibility issue between Teefer.sys and the Microsoft Bridge.sys driver.
SEP client user interface cannot be launched
Fix ID: 2427019
Symptom: After installation of SEP 12.1, the SEP client user interface cannot be started. The user interface stops responding after launch.
Solution: A deadlock between two components, SmcGui.exe and SymCorpUI.exe, was resolved to prevent this hang.
Client receives the auto-upgrade package a second time after being moved between groups
Fix ID: 2427171, 2427215
Symptom: A client is auto-upgraded from SEP 11.0 to SEP 12.1. The group has the "maintain existing client features" option unchecked. After auto-upgrade, the client is moved to a new group. When the client is moved back to the original group, it receives the package and attempts to install SEP 12.1 again.
Solution: TruScan, NTP and Core were added to the pre-defined feature list.
"Core" feature missing from Config.xml
Fix ID: 2427195
Symptom: The "Core" feature is missing from Config.xml when a package is applied to a group and "maintain existing client features" is unchecked.
Solution: The "Core" feature was added to the default feature list.
Number of trusted files is not visible in the logs
Fix ID: 2427297
Symptom: Scan results for trusted files do not show in the client scan log. The number of trusted files is shown on the client scan UI during a scan, and in SEPM when monitoring a scan.
Solution: A column for "Trusted files" was added to the AV scan log.
Proxy settings are not replicated
Fix ID: 2429252, 2431717
Symptom: Proxy settings are not replicated after reboot if the user is not logged in during the attempt.
Solution: The replication job is now executed after the console login.
Java application loses connection after SEP 12.1 client is installed
Fix ID: 2429404
Symptom: Under heavy network traffic conditions, some Java applications that transfer data over the network may lose connection after SEP 12.1 is installed.
Solution: An internal buffer cache in the firewall driver, Teefer.sys, was increased to avoid this issue.
"Symantec CDStart Menu has stopped working" message when running setup.exe
Fix ID: 2430407
Symptom: When setup.exe is executed from a very long path, setup fails to start and displays the message "Symantec CDStart Menu has stopped working."
Solution: A buffer in setup.exe was increased to allow the setup to run from a very long path.
Risk Distribution by Detection Method report displays too many Tamper Protection events
Fix ID: 2430571
Symptom: The Risk Distribution by Detection Method report displays too many Tamper Protection events.
Solution: The query was modified to filter and display only Tamper Protection events.
Default Install vs. Custom Install of SEPM is confusing
Fix ID: 2430626
Symptom: During installation of SEPM there is a choice for "Default configuration" or "Custom configuration." The choices do not have supporting text to describe the options.
Solution: The SEPM installation/configuration wizard was modified to display the following:'
Default configuration (fewer than 100 clients)
Custom configuration (more than 100 clients, or custom settings)
SEPM fails to start after upgrade from SEP SBE 12.0 to SEP SBE 12.1
Fix ID: 2431712
Symptom: After migration from SEP SBE 12.0 to SEP SBE 12.1 on a 64-bit computer, the SEPM service fails to start and the administrator is unable to login to the console. The file "SecarsRes.dll" is missing after migration.
Solution: The SEPM installer was modified to prevent removal of the "SecarsRes.dll" file during migration.
Green dot does not display after repairing the SEP client
Fix ID: 2434409
Symptom: The client is connected to the SEPM and displays the green dot in the system tray icon. After repairing the SEP client using the Add/Remove Programs Control Panel, the green dot is missing.
Solution: The installer was modified to correct a condition where a registry key was set incorrectly during the repair operation.
Insight and CAT servers landing page are not customer-friendly
Fix ID: 2435551
Symptom: When customers try to verify if they can reach the reputation servers, they are greeted with a certificate error, then a blank page.
Solution: When accessing these servers via a web browser, a customer-friendly web page now appears.
Cannot resize the column width on the Clients tab within the SEPM Console
Fix ID: 2435614
Symptom: Not all data is visible within the fields on the Clients view within the SEPM Console.
Solution: Added tooltips which now show the data in the field being viewed.
Client shows as offline within SEPM even though it is functional on the endpoint
Fix ID: 2436933
Symptom: Within the SEPM console, the client status is showing as "offline". On the endpoint, the SEP client is functioning as expected.
Solution: Resolved by changes to the client recognition logic. The "hardware ID" and "known client ID" values are now handled differently within SEPM to ensure that clients are correctly recognized by the Manager.
Duplicate client entries showing in the SEPM console after cloning an endpoint
Fix ID: 2436935
Symptom: After cloning an endpoint, each clone shows in SEPM with two entries. One entry shows the client as offline, and one is online.
Solution: Resolved by changes to the client recognition logic. The "hardware ID" and "known client ID" values are now handled differently within SEPM to ensure that clients are correctly recognized by the Manager.
Higher than normal CPU usage while endpoint is idle
Fix ID: 2436943
Symptom: Higher than expected CPU usage is noticed on an endpoint while the computer is idle.
Solution: Multiple performance improvements were made to the SEP client to reduce CPU usage.
"Error 1920. Service Symantec Migration Service (SEPMasterServiceMig) failed to start" when upgrading from SSEP 5.1 client to SEP 12.1 client
Fix ID: 2439998
Symptom: When upgrading clients from SSEP 5.1 to SEP 12.1, an intermittent error occurs. This error occurs when an older version of the dll remains on the system and is attempted to be loaded by a newer version of the driver.
Solution: Changed the upgrade logic to rename sysfer.dll on upgrade, preventing this error.
Poor Lotus Notes email scanning performance
Fix ID: 2338687
Symptom: Lotus Notes email performance is slow when Lotus Notes email protection is enabled.
Solution: Lotus Notes email scanning performance is improved by caching the scan results. Attachments are not rescanned if they have not changed. In addition, emails with multiple attachments are now passed to the virus scanner in one batch transaction.
Subscribing will provide email updates when this Article is updated. Login is required.
Thanks for your feedback. Let us know if you have additional comments below. (requires login)
This will clear the history and restart the chat.