Validation using vsradiusclient_test fails with [-3] error
Last Updated July 25, 2017
When performing a validation test using vsradiusclient_test tool, the radius call fails
Failed: recfrom <[IP address]> failed on socket 1944. detailed reason: [0, No error] [-3]
Radius Call Failure
This failure can occur if the client running the validation test experiences network latency.
The [--timeout int] option can be used to increase the timeout value. (For example, [--timeout 10] to Please note that this is only set in the vsradiusclient tool after it is determined that the client system may be experiencing network latency. If this happens, your network team needs to resolve the issue.
Note: The timeout option is not currently available in GINA, and customers using GINA and experiencing the timeout cannot use the work around of increasing the timeout to bypass the network issue. Therefore, they will need to resolve their network latency issue on their end. However, artf98228 is filed requesting the timout option to be added in GINA as well.
Imported Document ID: SO18276
Subscribing will provide email updates when this Article is updated. Login is required to Subscribe