PGP Universal Server fails to boot up after not being shut down properly due to a power outage or hard reset. File system errors also prevent logging in and accessing the shell (also in single user mode).
Checking filesystems: contains a file system with errors, check forced
UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
Power outage or hard reset
1) Download 3rd party live Linux distribution that contains "fsck" utility for ext3. Any live linux distribution that supports ext3 can be used (e.g. SystemRescueCD - www.sysresccd.org).
2) Either burn the ISO to a CD in case you'll be using this procedure for physical hardware or use "Connect to Disk Image File (iso)" for accessing VMware node with VMmware console.
3) Boot the CD / ISO image with live Linux distribution.
4) Check which partitions are mounted with "mount" command.
5) Use "fdisk -l" command to find out on which partitions to run recovery commands (usually this will be "/dev/sda1" and "/dev/sda2" in case of PGP Universal Server 3.2). HINT: you want to run "fsck.ext3" on the partitions that are NOT mounted.
6) Run "fsck.ext3" command on both partitions of PGP Universal Server (sda1 and sda2):
7) Confirm repairing of the file system when prompted with Y <enter>.
8) Reboot the computer, unmount ISO image / remove the CD from drive and complete normal boot up process. At this stage PGP Universal Server should complete booting normally if the recovery of the file system was completed successfully.
PGP Universal Server 3.2 (applicable to all ext3 filesystems)
Imported Document ID: TECH194582
Subscribing will provide email updates when this Article is updated. Login is required.
Thanks for your feedback. Let us know if you have additional comments below. (requires login)
Subscribed to the Article.
Unable to subscribe
Thanks for your additional feedback !!!
Enterprise Support Virtual Agent
Rate Me :
Tell us more:
Welcome! My name is Sami, the Enterprise Support Virtual Agent answering technical support questions.