ACL on IPv6 is not yet a supported feature on all SGOS versions.
What you will see when attempting to add an IPv6 ACL:
ProxySG is configured with an IPv6 address for management services.
When attempting to add an IPv6 ACL, the ProxySG returns an "Invalid input detected" error.
Configure an IPv6 ACL to permit only IPv6 address 2001:0db8:85a3:08d3:1319:8a2e:0370:7334 / 64 to manage the proxy:
login as: admin
10.105.13.250 - Blue Coat SG200 Series>en Enable Password:
10.105.13.250 - Blue Coat SG200 Series#conf t Enter configuration commands, one per line. End with CTRL-Z.
10.105.13.250 - Blue Coat SG200 Series#(config)security allowed-access add 2001:0db8:85a3:08d3:1319:8a2e:0370:7334 64 ^ % Invalid input detected at '^' marker. % "2001:0db8:85a3:08d3:1319:8a2e:0370:7334" is not a valid IP address.
Management Console example:
Open up the management console and access Configuration > Authentication > Console Access > Console Access > New
In the "Add IP Address" box, key in "2001:0db8:85a3:08d3:1319:8a2e:0370:7334" in the IP address field and "64" in the Subnet mask field.
Click OK followed by Apply. You will see the same error:
% Invalid input detected at '^' marker. % "2001:0db8:85a3:08d3:1319:8a2e:0370:7334" is not a valid IP address.
This is currently an expected behaviour and there are no plans to support this in the near future yet.
Imported Document ID: 000008431
Subscribing will provide email updates when this Article is updated. Login is required.
Thanks for your feedback. Let us know if you have additional comments below. (requires login)
Subscribed to the Article.
Unable to subscribe
Thanks for your additional feedback !!!
Enterprise Support Virtual Agent
Rate Me :
Tell us more:
Welcome! My name is Sami, the Enterprise Support Virtual Agent answering technical support questions.