You want to save time in data collection/sending information from multiple ProxySGs.
This is useful for ADN cases where to upload the data, you must log in to multiple units and select the relevant data to send (which may include custom snapshots) and also particularly when the links are slow and loading the GUI would take a long time.
Prerequisite: Must have Director
For Director, there are basically 2 parts,
A. Creating a CLI overlay and
B. Using the overlay in a job.
Launch the Director client Java application
A. Create an overlay -------------------- 1. Go to "Configure" 2. Under the right-most pane, "Configuration Library", "Show Overlays" and click "New" 3. A "Create New Overlay" window will pop-up 4. Name the overlay with something descriptive such as "CLI_send_SR_data" 5. Leave the "When fetching refreshables" as it is 6. In the "Add to Overlay" section, choose "Using CLI" add the following:
B. Create a job --------------- 1. Go to "Jobs" 2. Under the right-most pane, "Jobs Library", "Show Config Jobs" and click "New" > New Job > Config 3. A "Create a New Job" window will pop-up 4. Name the Job under "Properties" 5. Go to the "Actions" tab 6. Select "New" and the default "Abort on Errors" Action will be created 7. Edit it, choose "Push Overlay" and select the overlay created previously (above) 8. Add ProxySGs under the "Select Target Device(s)". You can add as many ProxySGs as you like here - it may be easier to do it one by one though. 9. You should see something like "Push Overlay CLI_send_SR_data on Device mySG " in the box just below it 10. Click "Apply" and "OK" to save the job
You can now use the job to send information to an SR ticket. In particular, this overlay (in the job) will send Event_log, System_information and Packet_capture file to the ticket X-XXXXXXXXX.
Note: Other information that can be sent can be seen using CLI on the ProxySG#(config) under: diagnostics > "service-info" > "view available".
The key here is to use the CLI to explore ways to automate the data sending using Director which can also report the success/failure of the job
Example: ProxySG#(config service-info)view available Service information that can be sent to Blue Coat