Configuring the ProxySG to upload Access logs to two different locations
Note: Repeat the process below if wanting other logs to go to different locations.
Log into the ProxySG Management Console (https://<ip.address.of.proxysg>:8082/ ) > Configuration tab > Access Logging > Logs. Click on the "New" button and enter a Name, such as SecondLog. Select the desired Format and then click "Apply".
Go to "Upload Client" tab. Under "Log" use the drop·down arrow and select the new log created (ex. SecondLog) Under "Upload Client" field select FTP client and input the FTP information. Click "Apply" and make sure the ProxySG successfully saved the changes.
Go back to Management Console > Configuration tab > Policy > Visual Policy Manager > Launch button. Select Policy menu and Add a "Web Access Layer". Rename the Layer to something meaningful. Under the "Action" field right click > Set... > New... > select "Modify Access Logging..." and give it a meaningful name. Select "Enable logging to". Use drop arrow to select new log created (ex. SecondLog). Click OK.
Click on the Install Policy button and the new access log will be up and running.
Imported Document ID: 000008782
Subscribing will provide email updates when this Article is updated. Login is required.