The article describes a way how to access RSW and enter RSW commands from the CPM Unix prompt.The article describes a way how to access RSW and enter RSW commands from the CPM Unix prompt.
Goal: Accessing RSW from the CPM Unix prompt on purpose of gathering troubleshooting information.
It is possible to use telnet to connect to to RSW daemon on the master VAP and execute RSW commands in a single line from the CPM Unix shell.
Here is an example how to collect OSPF routes from the master VAP called vap_1 (some output is removed for brevity). The
"sleep" command is required to add a pause allowing the previous commands to finish before the connection is closed.
CBS# unix su Password: [root@CBS admin]# (echo admin; echo enable; echo admin; echo show ip ospf route; sleep 2; echo quit) | telnet vap_1 2604 Trying 220.127.116.11...
Connected to vap_1.
Escape character is '^]'.
ZebOS version 7.8.3 IPIRouter 03/07/13 22:42:29
User Access Verification
ospfd#show ip ospf route
OSPF process 1:
Codes: C - connected, D - Discard, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
... <removed> ...
Connection closed by foreign host. [root@CBS admin]#
You can connect to BGP daemon on TCP port 2605 or NSM on the port 2601 in a similar manner.
As with any Unix commands, be careful that you've typed each command correctly to avoid unintended effects.
Imported Document ID: 000019442
Subscribing will provide email updates when this Article is updated. Login is required.