The customer can make use of this procedure to collect all necessary data in one step when troubleshooting a potential GBIC fault.Individual or multiple link flaps occurred on the NPM port(s). The customer suspects a faulty GBIC on Crossbeam.
/var/log/messages may contain lines "possibly bad SFP"
Goal: Collect as much information as possible to simplify and speed up a potentially faulty GBIC identification.
The the following steps should be performed:
1. Cabling and GBIC:
a) was cabling checked?
b) was GBIC re-inserted?
c) was a different port on NPM and switch tested?
2. Crossbeam part:
1. Telnet to a particular NPM module and get the following:
b)NPM port info:
Where <number> is a particular port number on the NPM card.
c) /var/log/messages either separately or as a part of "show-tech bundle"
3. Adjacent switch/router part:
a) get router/switch logs - any corresponding link flap or other related messages are present?
b) switch/router port side has a GBIC or is directly connected to the switch/router?
No workaround available.
Imported Document ID: 000019448
Subscribing will provide email updates when this Article is updated. Login is required.