The default timeout setting of 3 seconds for "radius-server" XOS command may not be long enough if the Radius server uses the "delayed Access-Reject response" feature.Even with correctly configured radius-server it may be possible under certain circuimstances (see below) to bypass Radius and authenticate as a local user instead.
XOS command "radius-server" has a default timeout of 3 seconds while it waits for the reply (positive/negative) from the Radius server. However, in cases where the Radius server is using a "delayed Access-Reject response", the negative reply might not come back soon enough and XOS will fall back to another Radius server in the list, or, if no other radius-server is present, it falls back to a local authentication.
Example of the Radius server configuration which can cause such behaviour (FreeRADIUS):
radiusd.conf: cleanup_delay = 5 reject_delay = 5
(request gets rejected as per
reject_delay value or a
cleanup_delay in case the latter one is lower)
Configure XOS radius-server with a timeout value which is
higher than a "delayed Access-Reject response" as configured in the Radius server.