first time a SG9000 is powered up after replacing the 3V battery the following messages will be displayed:
To resolve this issue it is necessary to use the power button on the front off the system to turn the SG9000 off and back on again. Power cycling the SG9000 appliance using the front power button is only required one time after the 3V battery is replaced. After powering on the SG9000 using the front power button, the appliance will boot normally for any subsequent restarts.
1) Flip the front panel (bezel) down to access the front power button.
2) Press the power button to turn the appliance off and then back on again.
Imported Document ID: 000021722
Subscribing will provide email updates when this Article is updated. Login is required.