This article discusses SSL Visibility appliance support for IPv6, and what protocol or frame encapsulation is supported.
The SSL Visibility appliance's management interface can be configured with either an IPv4 or IPv6 address. The SSL Visibility appliance also supports SSL decryption on TCP packets in IPv4 and IPv6. The IP packet must be encapsulated in an Ethernet-II frame, with an optional VLAN tag: 802.1Q or 802.1ad (QinQ).
Network traffic for all other protocols and frame encapsulations are not sent to the SSL processing engine, including the following:
Information is also available in the
SSL Visibility Appliance Administration & Deployment Guide, available from
bto.bluecoat.com > Documentation.
Imported Document ID: 000023755
Subscribing will provide email updates when this Article is updated. Login is required.
Thanks for your feedback. Let us know if you have additional comments below. (requires login)
Subscribed to the Article.
Unable to subscribe
Thanks for your additional feedback !!!
Enterprise Support Virtual Agent
Rate Me :
Tell us more:
Welcome! My name is Sami, the Enterprise Support Virtual Agent answering technical support questions.