setup reset all command does not work correctly on PacketShaper-S series if time zone setting is
PacketShaper S-series hangs during the restart process after executing the
setup reset all command.
Blue Coat recommends using the following time zones for GMT offset "GMT+00:00".
Reykjavik, Greenwich Mean Time, UTC
London, Edinburgh, Dublin, Lisbon, Tenerife
[Note] The time zone
Local's offset is GMT+00:00.
Unplug the power cable if you experience this issue. After plugging the power cable back in, the PacketShaper boots up with factory default settings.
ID: "Bug 220329"
PacketShaper# set reset all This operation will reset the entire PacketShaper configuration to the factory default state.
Please confirm if you really want to proceed (NO): yes
Exiting modules -............*......*...*..*...*.*....*<--Restart process hangs at this point
Imported Document ID: 000025519
Subscribing will provide email updates when this Article is updated. Login is required.