When the SYS MGMT port is connected to a management network, you may want to enable the Dedicated Management Port option so that the unit cannot be accessed from other networks; this provides increased security. Enabling management port access will cause loss of remote connectivity to the unit through all other ports.
To enforce all management traffic for PacketShaper S-Series to its management port only, issue the command
sys set dedicatedMgmtInterface 1
Note: Issue the command
sys set dedicatedMgmtInterface 0 to disable dedicated management port access.
Imported Document ID: 000032462
Subscribing will provide email updates when this Article is updated. Login is required.