You want to know to take a packet capture on proxySG , ASG or SWG VA appliance to filter LACP (Link Aggregation Control Protocol) between the Proxy appliance and the switch or router. This can be helpful to troubleshoot proxySG , ASG , SWG VA link aggregation related issues.
To capture packets or frames containing LACP , capture filter "ether proto 0x8809" can be used
To apply packet capture filter navigate to Management console --> Maintenance --> Service Information --> Packet Capture
Also if the packet capture on the device was not filtered , Wireshark display filter "slow" can be used to filter LACP packets . LACP support is implemented within the "Slow Protocols" dissector. This filter will select LACP as well as other the other "Slow Protocols"
A successful link aggregation setup between Proxy and switch will show packet from both switch and proxy on the same actor port.
Subscribing will provide email updates when this Article is updated. Login is required to Subscribe