Can Advanced Threat Protection's Inline interfaces both be on the same subnet?
Last Updated December 12, 2018
Can the Advanced Threat Protection 8880 appliance with dual Inline scanning interfaces be configured where both Inline interfaces are on the same subnet?
Inline1 IP: 10.10.12.25
Inline2 IP: 10.10.12.225
This configuration is not supported on the Advanced Threat Protection 8880 appliance. Each Inline and Management interface needs to be on separate subnets. As of ATP 2.3, the web interface will allow you to configure both Inline interfaces on the same subnet, but there will be unintended consequence if they are configured this way and it is not supported.
Subscribing will provide email updates when this Article is updated. Login is required to Subscribe