The ProxySG will not boot.
No disk drives appear to be at fault.
The ProxySG will not accept keyboard input.
While attached via serial console, the error message that keeps repeating on the screen is:
VIA_VT8251_smb_driver:write_byte Bus is not idle for device 0:EE, status=3
The most important part of this message is "Bus is not idle for device".
The ProxySG is encountering a hardware issue.
Please work with support to verify the hardware issue then to issue an RMA for the unit.
Subscribing will provide email updates when this Article is updated. Login is required to Subscribe
Thanks for your feedback. Let us know if you have additional comments below. (requires login)
This will clear the history and restart the chat.