Customer attempts to change the path for an FTP Access Log in Management Center, but after applying the change, the path remains the same or is not displayed.
This was tested on SGOS 22.214.171.124 and 126.96.36.199
This is discover by visual inspection, no error message is displayed.
Likely, this issue is caused by using special characters in the path.
Use the Command Line Interface (CLI) to set the path:
To blank out the FTP path use (two quotes with nothing in between):
Subscribing will provide email updates when this Article is updated. Login is required to Subscribe
Thanks for your feedback. Let us know if you have additional comments below. (requires login)
This will clear the history and restart the chat.