Moving forward, the Proxy closest to the client is called the Child Proxy and the proxy upstream from the Child Proxy will be called the Parent Proxy
Steps on Child Proxy First make sure the Proxy is set to intercept HTTP and HTTPS traffic Open the GUI-->Configuration-->Services-->Proxy Services if transparent set transparent port 80 and 443 to intercept if explicit set explicit port 8080 or 80 to intercept
1) Create forwarding host Open the GUI-->Configuration-->Forwarding-->Forwarding Host Click New and give the host an Alias (name, reference HTTP or Port 80 in the name so we know this host is for HTTP) Then enter the IP or hostname of the Parent Proxy and set the type to Proxy. Then select HTTP: 80 Click OK This is for HTTP
Next we want to do the same thing but for HTTPS Click New, set the name(reference HTTPS or Port 443 in the name so we know this host is for HTTPS and host but for the type select Server Then select HTTPS: 443 (do not select Verify SSL certificate) click ok then click apply to save changes
2) Now we want to create policy to send traffic to the Parent Proxy. On the Child Proxy open the VPM and add a forwarding layer First we will create the rule for HTTP Right click destination-->Set-->new-->Destination Host/Port. Set port to 80 and click add then click OK Now set the action, right click-->set-->new-->Select forwarding. On the left hand side, select the forwarding host you created for HTTP and click Add then click ok and ok again
Now, we want to create the policy for HTTPs Add a new rule, set the destination again like we did before but set the port to 443 Set the action like we did before but chose the HTTPS forwarding host and then install policy
Now, when the Child Proxy sends traffic upstream it will use its own IP address, meaning it will not reflect the clients IP address You have two options 1) Configure Reflect Client IP
Now, on the Parent proxy we need to make sure the proxy is set to intercept traffic. Open the GUI-->Configuration-->Services-->Proxy Services. make sure transparent port 80 and port 443 are enabled and the proxy will not intercept traffic.
This is the basic configuration for proxy chaining.
Subscribing will provide email updates when this Article is updated. Login is required to Subscribe
Thanks for your feedback. Let us know if you have additional comments below. (requires login)
Subscribed to the Article.
Unable to subscribe
Thanks for your additional feedback !!!
Enterprise Support Virtual Agent
Rate Me :
Tell us more:
Welcome! My name is Sami, the Enterprise Support Virtual Agent answering technical support questions.