Slow imaging speeds because of SMB throttling on network.
In one case, imaging with Ghost Task Server allowed imaging to take place in 6 minutes where imaging with Deployment Server (using Ghost imaging) required over a hour. This was after verifying that the NIC driver in WinPE Automation was not causing the issue.
SMB throttling was enabled on network.
To verify that SMB throttling is the cause of the issue, the following test will verify this issue:
1. Create a Copy File To job that copies all files of a complete image to a directory on a Windows XP workstation. When this job is run, the copy process should take several minutes to complete because SMB is NOT being used in the copy process.
2. From the same Windows XP workstation, establish a network connection to the image file source and "drag copy" all files of the same image to a directory on the hard drive. This process will probably take +30 minutes since this IS using SMB which is being throttled on the network.
The resolution to this issue is to remove or alter current SMB throttling settings on layer 3 switches and/or routers.
Applies To Deployment Server all versions.
(Several reported cases were with virtualized Deployment Server 6.9 SP1 installations.)
Imported Document ID: TECH41876
Subscribing will provide email updates when this Article is updated. Login is required.