You want to configure your DRAC4 or DRAC5 for the first time on your Dell Power Egde server.
To configure the DRAC5 on the 9600 series Symantec Security Information Manager (SSIM) appliance. Note: For detailed information on the DRAD5, refer to the Dell documentation at the link below. http://www.dell.com/downloads/global/power/ps3q06-20060118-McGary.pdf During the boot process, press ctrl+E when prompted to enter the Remote Access Configuration Utility. Once in the Configuration Utility, follow the on screen instructions to configure the DRAC as needed. To configure the DRAC4 on the 9500 series Symantec Security Information Manager (SSIM) appliance. Note: For detailed information on the DRAD5, refer to the Dell documentation at the link below. http://www.dell.com/downloads/global/power/ps4q04-20040101-McGary.pdf
At boot up after BIOS screen press Control + D
You need to use the hotkey to change value. type <i> to select your IP etc.. Configuration is saved when you exit. Once this is done and you restart you can logon via the web interface -> https://ip_of_drac Default user name is "root" and default password is "calvin". Make sure you change the password first time you logon
Subscribing will provide email updates when this Article is updated. Login is required to Subscribe
Thanks for your feedback. Let us know if you have additional comments below. (requires login)
This will clear the history and restart the chat.